TFL Bearing
Replacement Review

22200 Series Bearing Cross-Reference Review

Start with the complete bearing designation, then compare the selected design—not just the 222xx base number. Bore type, internal clearance, cage, lubrication feature, load, speed, fit, and environment can change whether a proposed replacement is suitable.

Existing and replacement bearings being compared by markings and dimensions

22200 Series Models in This Reference Set

These values support the first comparison. They do not establish interchangeability: the complete suffix, bore, clearance, cage, lubrication feature, fits, loads, speed, and operating environment still need confirmation.

Model Design d mm D mm B mm C kN C0 kN Grease rpm Oil rpm Mass kg
22218 EJ 90 160 40 355 388 3,500 4,300 3.5
22218 EM 90 160 40 355 388 3,500 4,300 3.5
22220 EJ 100 180 46 435 502 3,100 3,800 5
22220 EM 100 180 46 435 502 3,100 3,800 5
22222 EJ 110 200 53 555 653 2,900 3,500 7.2
22222 EM 110 200 53 555 653 2,900 3,500 7.2

See the full dimensions and ratings table for mounting dimensions, thermal reference speeds, and calculation factors.

What Must Match Before Approval

Complete designation

Keep the full model and suffix exactly as marked; a base number can hide bore, clearance, cage, or lubrication differences.

Shaft and housing

Confirm d / D / B, shoulder diameters, fillets, fits, sleeve or withdrawal arrangement, and available axial space.

Operating duty

Check radial and axial load, speed, temperature, shock, vibration, misalignment, contamination, and lubrication.

Order requirement

State quantity, destination, timing, preferred brand or approval list, and required inspection or shipping documents.

Replacement Decision Boundary

Matching boundary dimensions only establishes a first fit check. Confirm the selected design's ratings, internal geometry, clearance, cage, bore, lubrication features, speed capability, and application conditions before ordering or approving a machine change.

Request a 22200 Series Review

Send the complete old-bearing marking, photos, application, operating data, quantity, destination, and any brand or document requirements.

Send Bearing Details